TP-Link TL-SL2210 - Show Storm-Control; Show Bandwidth

83
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configurations of all Ethernet ports:
TL-SL2428(config)# show interface configuration
Display the configurations of port 2:
TL-SL2428(config)# show interface fastEthernet 1/0/2 configuration
show storm-control
Description
The show storm-control command is used to display the storm-control
information of Ethernet ports.
Syntax
show storm-control [ interface { fastEthernet port | gigabitEthernet port |
range fastEthernet port-list | range gigabitEthernet port-list }]
Parameter
port —— The Ethernet port number.
port-list —— The list of Ethernet ports.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the storm-control information of port 4, 5, 6, and 7:
TL-SL2428(config)# show storm-control interface range fastEthernet
1/0/4-7
show bandwidth
Description
The show bandwidth command is used to display the bandwidth-limit
information of Ethernet ports.