70
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the DST time information of the switch
TL-SL2428# show system-time dst
show system-time ntp
Description
The show system-time ntp command is used to display the NTP mode
configuration information.
Syntax
show system-time ntp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the NTP mode configuration information of the switch:
TL-SL2428# show system-time ntp
show cable-diagnostics interface
Description
The show cable-diagnostics interface command is used to display the cable
diagnostics of the connected Ethernet Port., which facilitates you to check the
connection status of the cable connected to the switch, locate and diagnose the
trouble spot of the network.
Syntax
show cable-diagnostics interface { fastEthernet port | gigabitEthernet port }
Parameter
port āā The number of the port which is selected for Cable test.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
To Next Page
Loading...
