TP-Link TL-SL2210 - Show Mac Address-Table Max-Mac-Count Interface; Show Mac Address-Table Interface

52
Example
Display the Aging Time of the MAC address:
TL-SL2428(config)# show mac address-table aging-time
show mac address-table max-mac-count interface
Description
The show mac address-table max-mac-count interface command is used to
display the security configuration of all Fast/Ethernet ports or the specified port.
Syntax
show mac address-table max-mac-count interface { fastEthernet [port] |
gigabitEthernet [port] }
Parameter
port —— The Fast/Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the security configuration of all Gigabit Ethernet ports:
TL-SL2428(config)# show mac address-table max-mac-count interface
gigabitEthernet
Display the security configuration of port 1:
TL-SL2428(config)# show mac address-table max-mac-count interface
fastEthernet 1/0/1
show mac address-table interface
Description
The show mac address-table interface command is used to display the
address configuration of the specified port.
Syntax
show mac address-table interface { fastEthernet port | gigabitEthernet
port }
Parameter
port —— The Ethernet port number.