TP-Link TL-SL2210 - Show Running-Config; Show System-Time; Show System-Time Dst

69
show running-config
Description
The show running-config command is used to display the current operating
configuration of the system or a specified port.
Syntax
show running-config [ interface { fastEthernet port | gigabitEthernet port } ]
Parameter
port —— The Fast/Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system information:
TL-SL2428# show running-config
show system-time
Description
The show system-time command is used to display the time information of the
switch.
Syntax
show system-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the time information of the switch
TL-SL2428# show system-time
show system-time dst
Description
The show system-time dst command is used to display the DST time
information of the switch.
Syntax
show system-time dst