Layer 3 managed switch installation manual
23Technical Parameters Specifications
power input
220V~ 50Hz
IEEE 802.3u:100BASE-X Fast Ethernet (twisted pair or fiber optic)
IEEE 802.1s:MSTP spanning tree
MAC address learning
Automatic updates
IEEE 802.3an:10GBASE-T 10G Ethernet
Data transfer rate Fast Ethernet 100Mbps half duplex, 200Mbps full duplex
-40ÿ~70ÿ
10GBASE-T:14880952pps/port
IEEE 802.1p: LAN layer 2 Qos/Cos protocol regarding traffic priority (multicast filtering function)
Network media 100BASE-TX: 2 pairs of Category 5 (Cat5) or above UTP/STP (<=100m)
Working humidity
Storage humidity
Gigabit Ethernet 2000Mbps full duplex
Packet forwarding rate 100BASE-TX: 148810pps/port
IEEE 802.1x: Port-based network access control, authentication
10GBASE-T: 4 pairs of Category 6 (Cat6) UTP (<=55m) or 4 pairs of Cat6/Cat6a/Cat7 STP, Cat6a UTP (<=100m)
TL-ST5008
Operating temperature
5%~90%RH no condensation
transfer method
Technical Standard IEEE 802.3: Ethernet Media Access Control (MAC) Protocol
IEEE 802.1d:STP spanning tree
IEEE 802.3bz:2.5G/5GBASE-T Ethernet
storage temperature
IEEE 802.1w: RSTP spanning tree
IEEE 802.3ab:1000BASE-T Gigabit Ethernet
store and forward
0ÿ~40ÿ
1000BASE-T:1488095pps/port
IEEE 802.3x: flow control
10G Ethernet 20000Mbps full duplex
10%~90%RH no condensation
1000BASE-T: 4 pairs of Category 5e (Cat5e) or above UTP/STP (<=100m)
Product number
IEEE 802.1q: VLAN bridge operation
Machine Translated by Google
To Next Page
