Agreement
Reading object
In this manual, unless otherwise specified, the TL-ST5016F model is used as an example. The switch mentioned refers to a fully 10 Gigabit Layer 3 managed switch or a 10
Gigabit uplink Layer 3 managed switch.
This manual is suitable for the following people:
Appendix D: Product warranty card.
The schematic diagrams related to the products in this manual are for illustration only. Please refer to the actual model. If there is no explanation, the TL-ST5016F will be used as
an example.
Network Engineer
Appendix E: Declaration of Toxic and Hazardous Substances Content.
This manual uses the following eye-catching symbols to indicate areas that should be paid attention to during operation. The meanings of these symbols are as follows:
network administrator
This icon indicates a warning that requires attention.
This icon indicates matters that should be paid attention to during operation. Misoperation may lead to equipment damage
and other adverse consequences.
The product specification label is located on the bottom of the
device. Scan the QR code to view the explanation of the safety symbols.
Note: ÿTo
avoid possible equipment damage and personal injury before and during the installation of the equipment, please read the relevant contents of this manual carefully.
This icon indicates necessary supplements and explanations to the description of the operation content.
IIIReading objects
Machine Translated by Google
To Next Page
Loading...
