123
Chapter 15
Quality of Service
Ether Type: Ethernet protocol for classification.
Source MAC Address: Source mac address for classification.
Source MAC Mask: Source mac mask for classification
Destination MAC Address: Destination mac address for classification. Please note that
only LAN mac address can take effect.
Destination MAC Mask: Destination mac mask for classification.
Source IP Address: Source ip address for classification.
Source IP Mask: Source ip mask for classification.
Destination IP Address: Destination ip address for classification.
Destination IP Mask: Destination ip mask for classification.
DSCP Check: Classification will only take effect at packets having this DSCP.
Protocol: Classification will only take effect at packets of this protocol.
Queue: Packets matching the classification will enter this queue.
Mark DSCP: Packets matching the classification will be marked at DSCP field.
Mark 802.1P Priority: Packets matching the classification will be marked at 802.1P field.
Committed Rate: Set the maximum rate allowed for the flow.
Committed Burst Size: Set the maximum traffic amount allowed to be transmitted in
case of a burst of traffic.
Note: If you want to delete a classification, select the corresponding checkbox of the rules to be deleted in the
classification list, and click Delete above the table to delete selected classifications, or click Delete icon to delete one
classification.
To delete a queue:
1. Visit http://tplinkmodem.net or http://192.168.1.1, and log in with the password you
set for the GPON router.
2. Go to Advanced > QoS > Flow Classification.
3. In the classification list, select the corresponding checkbox of the rules to be
deleted and click Delete above the table to delete selected classifications, or click
delete icon to delete one classification.
To Next Page
Loading...
