TP Toys active fun TP814 User Manual

TP814
Triple Round Wood
Multiplay
INSTRUCTIONS FOR ASSEMBLY
MAINTENANCE AND USE.
PLEASE RETAIN FOR FUTURE REFERENCE.
2 Person
Assembly Build Recommended
TOY MUST BE ASSEMBLED BY AN ADULT BEFORE USE.
THIS PRODUCT CONTAINS SMALL PARTS AND IS NOT SUITABLE FOR CHILDREN
UNDER 36 MONTHS. SMALL PARTS. CHOKING HAZARD.
CHILDREN MUST NOT USE THE EQUIPMENT UNTIL PROPERLY INSTALLED.
REMOVE ALL PACKAGING BEFORE GIVING TO YOUR CHILDREN.
WARNING! ONLY FOR DOMESTIC USE. FOR OUTDOOR USE. ADULT SUPERVISION IS REQUIRED.
WARNING! THIS PRODUCT IS INTENDED FOR USE BY CHILDREN FROM AGES 3 TO 12 YEARS.
WARNING! MAXIMUM COMBINED USER WEIGHT FOR SWING FRAME 200KGS
SINGLE SEAT USER WEIGHT - 60KGS GLIDE RIDE USER WEIGHT - 2 X 35KGS
ANCHORS THAT ARE SUPPLIED WITH THIS PRODUCT MUST BE FITTED BEFORE USE.
WARNING!
Important!
These instructions must be followed
for safe assembly and use.
Please retain for future reference.
Instructions Enclosed
IMPORTANT
This is the UPDATED
Instruction Manual.
Please destroy any
other instructions
included with this
product.
For assembly advice, please view the assembly video for this product on www.smythstoys.com,
email directsales@tptoys.com or call 01525 722769 (office hours).
TP814 Roundwood Triple Multiplay NEW In0814-D 25.09.17.indd 1 25/09/2017 10:41

TP Toys active fun TP814 Specifications

General

Brand	TP Toys
Model	active fun TP814
Category	Toy
Language	English

Summary

General Instructions and Safety

Assembly and Safety Information

Guidance on adult assembly, small parts, and potential sharp edges during construction.

SITING

Instructions on choosing a safe and level location for the play equipment.

USAGE

Specifies age range, prohibited activities, and domestic use for the toy.

SUPERVISION

Emphasizes adult supervision and advises against loose clothing or jewelry during play.

WEATHER CONDITIONS

Advice on slippery surfaces, hot parts, and securing the toy in high winds.

MAINTENANCE

SWINGING TOYS

Safety tips for swinging toys, including avoiding metal contact and not getting off while moving.

Stage 1: Initial Setup

Required Tools

Parts Checklist

Stage 2: Deck Top Bar Assembly

Attaching Deck Top Bar

Stage 3: Main Leg Assembly

Connecting Deck Legs

Stage 4: Main Leg Assembly Continuation

Ensuring Leg Orientation

Stage 6: Attaching Cross Beams

Securing Deck Cross Beams

Stage 7: Structural Reinforcement

Tightening Main Bolts

Stage 9: Deck Board Installation

Spacing Deck Boards

Guidance on spacing deck boards evenly with a minimum 13mm gap.

Stage 10: Ladder Rung Attachment

Fixing Ladder Rungs

Stage 11: Barrier Board Installation

Fitting Barrier Boards

Instructions for fitting barrier boards in a specific order with even spacing.

Stage 12: Safety Toggle Attachment

Eliminating Potential Traps

Stage 16: Slide Attachment

Fixing the Slide

Stage 17: Swing Seat Installation

Attaching Swing Seats

Instructions for attaching swing seats using hook bolts and 'S' hooks, requiring mallet.

Stage 19: Glider Downtube Assembly

Connecting Glider Downtubes

Stage 22: Glider Downtube Top Assembly

Completing Glider Assembly

Stage 23: Glide Ride Bracket Attachment

Positioning Glide Brackets

Stage 24: Securing Glide Brackets

Finalizing Bracket Fixings

Stage 26: Ground Anchoring

Marking and Digging Holes

Marking leg positions and digging 300mm cube holes for anchoring.

Fixing Stakes and Concrete

Fixing stakes to legs and filling holes with post-mix concrete for stability.

Anchoring Warning

Warning against setting the playset legs directly into concrete.

Freespace and Safe Play Area

Recommended Free Space

Defines safe play zones around the toy and lists obstacles to avoid.