TPS 90-FL - 3. Dissolved Oxygen Mode; 3.1 Selecting Dissolved Oxygen Mode; 3.2 Dissolved Oxygen Calibration

9
2. 90-FL Menu Structure
A detailed breakdown of the menu system of the 90-FL is shown below. This diagram provides a
quick reference for the menu functions available for the 90-FL.
→
F1:Calibrate
→
F1:Oxygen
F2:Conductivity
or: F2:TDS
F3:pH
F4:Temperature
→
F2:Mode
→
F1:Oxygen
→
F1:ppm
F2:ppM (Sal)
F3:%Sat
F4:%Gas
F3:Conductivity
F4:TDS
→
F3:Logger
→
F1:Recall
F2:Erase
→
F1:Erase All
F2:Erase Last
F3:Print Log
F4:Start
or: F4:Stop
F5:Program
→
F1:Rate per Day
F2:Time of Day
F3:Sampling Period
and Duration
→
F4:Setup
→
F1:Standards
→
F1:Conductivity
F2:TDS
F3:pH Buffers
F2:GLP
→
F1:Recall
F3:Print
F4:Initialise Meter
F3:Set AB
→
F1:A=Pond,No B
F2:A=Pond,B=Data
F3:A=Data,NoB
F4:A&B=Data
F5:OFF
F4:k factor *
→
F1:k=.1 *
F2:k=1 *
F5:System
→
F1:Bat. Saver
→
F1:OFF
F2:5 minutes
F3:1 hour
F2:Set Clock
F3:Baud Rate
→
F1:300
F2:9600
F3:19200
F4:Stirrer Enable
or: F4:Stirrer Disable
* This function not available when a TPS k=10 sensor is connected.