1.10 Specifications
1.10.1 Dissolved Oxygen
Range Resolution Accuracy
0 to 32.00 ppM 0.01 ppM ±0.2% of full scale
0 to 320.0 % Saturation 0.1 % Saturation ±0.3 % Saturation
0 to 66.0 % Gaseous 0.1 % Gaseous ±0.1 % Gaseous
Note : Full scales are subject to sensor performance.
Sensor Type...........................................Clark type polarographic sensor with in-built ATC.
Salinity Correction for ppM.................0 to 50.0 ppK, automatic using conductivity/TDS reading.
Temperature Compensation.................Automatic for membrane permeability.
Automatic for Dissolved Oxygen solubility in ppM mode.
Calibration............................................Automatic zero and span calibration.
Sensor Span Range ...............................65 to 200 %
1.10.2 Conductivity
Ranges Resolution Accuracy
k=0.1 Sensor
0 to 2.000 µS/cm
0 to 20.00 µS/cm
0 to 200.0 µS/cm
0 to 2000 µS/cm
0.001 µS/cm
0.01 µS/cm
0.1 µS/cm
1 µS/cm
±0.5% of full scale of
selected range at 25
O
C
k=1.0 Sensor
0 to 20.00 µS/cm
0 to 200.0 µS/cm
0 to 2000 µS/cm
0 to 20.00 mS/cm
0.01 µS/cm
0.1 µS/cm
1 µS/cm
0.01 mS/cm
±0.5% of full scale of
selected range at 25
O
C
k=10 Sensor
0 to 200.0 µS/cm
0 to 2000 µS/cm
0 to 20.00 mS/cm
0 to 200.0 mS/cm
0.1 µS/cm
1 µS/cm
0.01 mS/cm
0.1 mS/cm
±0.5% of full scale of
selected range at 25
O
C
Note : Ranges are automatically selected. Exact auto-ranging points and full scales are subject to
sensor performance.
Sensor Type...........................................Ryton
®
plastic body with two platinised platinum plates
with in-built ATC.
Temperature Compensation.................Automatic, 0 to 100
O
C
(standard Conductivity sensor is limited to 60
O
C)
Calibration............................................Automatic zero and span calibration
Sensor Span Range ...............................±25% of nominal k factor
To Next Page
Loading...
