TPS 90-FL - 12. Initialising the 90-FL

49
11. Setting the Clock
1. Select the Clock Set-up menu ( →→ F5:System →→ F2:Set Clock)
2. The display now shows the current time, for example…
Time is now 12:00
Enter new Time 12:00
3. Use the Numeric Keypad to enter the current time in 24 hour format, then press .
Alternatively, press to quit and retain the current setting.
4. If you pressed above, the display will now show the current date, for example…
Date is now 31/12/2000
Enter new Date 31/12/2000 dd/mm/yyyy
5. Use the Numeric Keypad to enter the current date in dd/mm/yyyy format, then press .
Alternatively, press to quit and retain the current setting.
Notes
1. Press the key to make any corrections as required.
2. The 90-FL tests that a valid time of the day is entered. If an invalid time is entered (eg. 25:00),
the 90-FL displays the message “Invalid Time”, then returns to the time setting screen so
that the correct time can be entered.
3. The 90-FL tests that a valid day of the month is entered. If an invalid date is entered (eg.
31/02/2001), the 90-FL displays the message “Invalid Date”, then returns to the date
setting screen so that the correct date can be entered.
4. The 90-FL also tests for leap years.