TR-Electronic CDH582 - Page 90

Checklist, Part 2 of 2
 TR-Electronic GmbH 2020, All Rights Reserved Printed in the Federal Republic of Germany
Page 90 of 91 TR-ECE-BA-GB-0163 v03 10/07/2020
. . .
Sub-item Note Reference yes
Preset adjustment function
● Ensured the preset adjustment
function can not be triggered
unintentionally
● Ensure the settings are made for
the correct axis
● After execution of the preset
adjustment function, check the
new position at the relevant axis
before restarting
● Chapter
TR Safety – Preset
Adjustment Function,
Page74
