To Next PageTo Next Page
Need help?Do you have a question about the TRAK K3KMX and is the answer not in the manual?
General| Model | K3KMX |
|---|---|
| Type | Circular Saw |
| No Load Speed | 5500 RPM |
| Max Cutting Depth | 65 mm |
| Weight | 3.5 kg |
Defines hazard symbols and their corresponding colors and meanings.
Essential safety rules for operating the machine.
Details the control hardware and software features of the KMX CNC.
Covers turning the system on/off, screen saver, axis modes, and operational modes.
Details fundamental machine controls like spindle, gib locks, knee, brake, draw bar, and speed changes.
Explains the two primary methods for programming machining operations.
Steps to access the Digital Readout (DRO) mode for manual operation.
Details the various functions available within DRO mode.
Explains how to manually move the machine axes using jog controls.
Describes entering manual movements and positions into a program.
Explains how to use servomotors for automated axis feeding.
Guides on starting a new program and naming it.
Describes standard events for 2-axis programming.
Describes standard events for 3-axis programming.
How to initiate the Auto Geometry Engine for specific profiles.
Defines the input prompts for A.G.E. Mill events.
Defines the input prompts for A.G.E. Arc events.
Correcting data entry before saving an event.
Modifying event data after it has been saved in the program.
Setting Z retract, tool lengths, and Z modifiers for each tool.
Verifying programmed tool movements and positions graphically.
Visualizing the programmed part and stock material in 3D.
Codes for system setup, installation, file transfer, and service.
Preparing the machine by setting part absolute position.
Initiating program execution from the beginning or specific events.
Codes for axis configuration, calibration, and sensor settings.
Codes used for testing machine functions and logs.
