TRAK K3KMX - Math Help Types

84
Southwestern Industries, Inc.
TRAK KMX Knee Mill, Bed Mill & ProtoTRAK KMX CNC Retrofit Safety, Programming, Operating & Care Manual
13.2 Math Help Types
Type
#
What you need
What you know
10
Intersection of two lines
• 2 points on each line
11
Intersection of two lines
• 2 points on one line
• 1 point on the other line
• angle between the lines
12
Intersection of two lines
• 2 points on one line
• 1 point on the other line
• a radius tangent to both lines when one
of the points on the two points known
line is also on the radius
13
Intersection of a line and an arc
• 2 points on the line
• arc center
• arc radius
14
Intersection of a line and an arc
• 2 points on the line
• 2 points on the arc
• arc radius
15
Intersection of two arcs
• center of each arc
• radius of each arc
16
Intersection of a line tangent to two
arcs (line does not cross arc centers)
• center of each arc
• radius of each arc
17
Intersection of a line tangent to an arc
• one point on the line
• center of the arc
• radius of the arc
18
Intersection of a line tangent to two
arcs (line crosses arc centers)
• center of each arc
• radius of each arc
19
Center and points of intersection of an
arc tangent to two arcs
• 2 of the arc centers
• all 3 radii
20
Center of an arc
• 2 points on the arc
• radius of the arc
22
Radius of an arc or circle
• 1 point on the arc
• center of the arc
23
Center of an arc or circle
• 2 points on the arc
• angle between the 2 points
24
Center and radius of an arc or circle
• 3 different points on the arc
25
Cartesian (X and Y) location
• polar (R and angle) coordinates
26
Angle in decimal
• angle degrees, minutes and seconds
27
Accurate X Y Center
• given X Y Center
• 2 points on the arc
28
Sides and angles of a right triangle
• at least one side and another side or an
angle
Calcu-
lator
+, -, *, /, =, square root