TRAK K3KMX - SET UP;RUN Mode; TOOL TABLE

61
Southwestern Industries, Inc.
TRAK KMX Knee Mill, Bed Mill & ProtoTRAK KMX CNC Retrofit Safety, Programming, Operating & Care Manual
10.0 SET UP/RUN Mode
The Set Up Mode contains the tool table, tool path, home, Verify and service codes.
10.1 TOOL TABLE
The tool table is where you set your Z retract, set the lengths of your tools and also
where you can set Z modifiers for each tool. The following example has 4 tools in the
program. The tool table looks as follows: