3.0 Description
3.1 ProtoTRAK KMX CNC Specifications
The list below summarizes the features and specifications. Each feature is described in
more detail in the appropriate section of the manual.
3.1.1 Basic System Specifications
Control Hardware
• Digital Servo Amplifiers – custom designed for ProtoTRAK operation
• D.C. Servo Motors – rated at 280 in-oz. continuous torque are twice that
required
• Precision Ball Screws – in the table and saddle
• Modular Design – simplifies service and maximized uptime
• 115V/60HZ/10 amps
• Feedrate Override of programmed feedrate and rapid
• Polycarbonate Sealed Membrane Keypad to lock out contamination
• 9.0” Color LCD
• USB port for interface with a storage device
• Rugged Industrial PC
• Glass Scale on quill for Z-axis readout
Software
• Diameter Cutter Compensation – allows programming of the part rather
than the center of the tool path
• Circular interpolation – makes arcs and any size hole easy to do with
standard tools
• Linear Interpolation – to machine lines at any angle
• Conrad – provides automatic corner radius programming with one data
input
• Incremental and Absolute – programming can even be mixed within an
event
• Error Messages – to identify programming mistakes
• Fault Messages – for system self-diagnostics
• Parts Graphics display
To Next Page
Loading...