12
TK 55711-19-OP-EN
Battery Installation and Cable Routing
WWAARRNNIINNGG
HHaazzaarrdd ooff EExxpplloossiioonn!!
An improperly installed battery could result in a fire, explosion, or injury. A
Thermo King approved battery must be installed and properly secured to
the battery tray.
WWAARRNNIINNGG
HHaazzaarrdd ooff EExxpplloossiioonn!!
Improperly installed battery cables could result in a fire, explosion, or
injury. Battery cables must be installed, routed, and secured properly to
prevent them from rubbing, chaffing, or making contact with hot, sharp, or
rotating components.
WWAARRNNIINNGG
FFiirree HHaazzaarrdd!!
Do not attach fuel lines to battery cables or electrical harnesses. This has
the potential to cause a fire and could cause serious injury or death.
WWAARRNNIINNGG
HHaazzaarrdd ooff EExxpplloossiioonn!!
Always cover battery terminals to prevent them from making contact with
metal components during battery installation. Battery terminals grounding
against metal could cause the battery to explode.
CCAAUUTTIIOONN
HHaazzaarrddoouuss SSeerrvviiccee PPrroocceedduurreess!!
Set all unit electrical controls to the OFF position before connecting battery
cables to the battery to prevent unit from starting unexpectedly and causing
personal injury.
NNOOTTIICCEE
EEqquuiippmmeenntt DDaammaaggee!!
Do not connect other manufacturer’s equipment or accessories to the unit
unless approved by Thermo King. Failure to do so can result in severe
damage to equipment and void the warranty.
SSaaffeettyy
To Next Page
Loading...