20
TK 55711-19-OP-EN
TriPac Options
Driver Convenience Package
Includes 1,800 watt inverter and two GFI receptacles. 120 amp alternator
provides quicker battery charging under heavy loads. Refer to the Operating
Instructions included with your inverter.
Standby Truck Integration
Provides seamless activation of the TriPac control system based on tractor
off / on indication.
Standby Truck Integration - with Dash-Mounted Selector
Switch
The switch allows the operator to disable the TriPac system without
accessing the HMI Control Panel in the sleeper.
Figure 12. Dash-Mounted Standby Switch
Dual Remote Hour Meter
Provides separate heater and TriPac engine time tracking for accurate and
effective maintenance/ Allows the technician to access and record hours of
operation without entering tractor cab.
Remote Engine Hour Meter
Provides engine time tracking for accurate and effective preventive
maintenance.
Closed Loop Cooling
Allows the TriPac to run independently of tractor coolant and allows “limp
home” capability in case of tractor alternator failure.
UUnniitt DDeessccrriippttiioonn
To Next Page
Loading...