TK 55711-19-OP-EN
35
Clearing Alarm Codes
To clear alarm codes:
1. If the alarm icon is Red, first note the alarm group that is illuminated on
the HMI display (ENG, ALT, ACS).
2. Use the HMI Control Panel System On/Off button to turn the TriPac unit
off.
3. Resolve the condition that caused the alarm.
4. Use the HMI Control Panel System On/Off button to turn the TriPac unit
on. Any active alarms will be cleared.
NNoottee:: If the alarm condition still exists, the alarm will return.
Active alarms and those recently cleared by the operator can be read and
cleared by a Thermo King service technician.
OOppeerraattiinngg IInnssttrruuccttiioonnss
To Next Page
Loading...