Relays and terminals on enclosure size H8
1Mains
2Relays
3Ground
4 Motor
Illustration 3.5 Enclosure Size H8
IP20, 380–480 V, 90 kW (125 hp)
IP20, 200–240 V, 37–45 kW (50–60 hp)
IP20, 525–600 V, 75–90 kW (100–125 hp)
Connecting to mains and motor for enclosure size H9
Illustration 3.6 Connecting the Frequency Converter to the
Motor, Enclosure Size H9
IP20, 600 V, 1.5–7.5 kW (2.0–10 hp)
Complete the following steps to connect the mains cables
for enclosure size H9. Use the tightening torques described
in chapter 3.2.1 Electrical Installation in General.
1. Slide the mounting plate into place and tighten
the 2 screws as shown in Illustration 3.7.
Illustration 3.7 Mounting the Mounting Plate
Installation TR150 and TR170 Quick Guide
BAS-SVX58D-EN
08/2020 All rights reserved.
11
3
To Next Page
Loading...
