Transcend T.sonic 650 - Disconnecting from a Computer; Safe Removal on Windows; Safe Removal on Mac OS; Safe Removal on Linux

26
Disconnecting from a Computer
Always follow the procedures listed below before you disconnect the USB cable from the T.sonic.
Removing the T.sonic 650 in Windows
®
Me, 2000, XP and Vista
1. Select the Hardware icon in the system tray.
2. The Safely Remove Hardware pop-up window will appear. Select it to continue.
Figure 10: Safely Remove Hardware
3. A message window will appear stating: “The ‘USB Mass Storage Device’ device can now be safely removed
from the system.”
Figure 11: Safe to Remove Hardware
4. Unplug the T.sonic from your computer.
Remove the T.sonic
™
650 in Mac
™
OS 10.0 or Later
1. Drag the Disk icon that corresponds to your T.sonic 650 into the trashcan.
2. Unplug your T.sonic 650 from the USB port
Remove the T.sonic
™
650 in Linux
™
Kernel 2.4 or Later
1. Execute unmount /mnt/ T.sonic to un-mount the device.
2. Unplug your T.sonic 650 from the USB port.