© Copyright 2015 TRENDnet. All Rights Reserved.
Product Overview
Package Contents
In addition to the access point, the package includes:
TEW-730APO
CD-ROM (User’s Guide)
Quick Installation Guide
Poll mounting hardware
Proprietary PoE injector
Power adapter (24V, 1A)
Grounding wire
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Features
TRENDnet’s 9 dBi Outdoor PoE Access Point, model TEW-730APO, provides wireless
N300 (2.4 GHz) building-to-building connectivity. It supports Fat AP, Thin AP, Virtual
Access Control (controls compatible Thin AP devices), and Virtual AC + Thin AP modes.
Fat AP mode supports a variety of installation scenarios with Access Point (AP), WDS
Bridge, WDS Repeater, Client, and CPE + AP modes. The rugged IP55 rated TEW-730APO
comes with a proprietary PoE injector and a pole mounting kit.
Multi-Mode Support
Supports Fat AP, Thin AP, Virtual Access Control (controls compatible Thin AP devices),
and Virtual AC + Thin AP modes
Fat AP Mode
Fat AP mode supports a variety of installation scenarios with Access Point (AP), WDS
Bridge, WDS Repeater, Client, and CPE + AP modes
Thin AP Mode
Thin AP mode supports management of the TEW-730APO by another device (such as
another TEW-730APO set to Virtual Access Control) and Thin AP supports Access Point
(AP) mode
Virtual Access Control (AC) Mode
Virtual Access Control mode manages other compatible access points set to Thin AP
Wireless N300 (2.4 GHz)
Compliant with 802.11n/g/b technology (2.4 GHz spectrum) with data rates up to 300
Mbps
Directional Antenna
Built in 9 dBi directional antenna
Outdoor Rated
Durable enclosure with an IP55 outdoor weather rating
Power over Ethernet (PoE)
Comes with a PoE injector (non-802.3af compliant)
Logs
Real time logs and statistics help trouble shooting
To Next Page
Loading...
Need help?
General
