© Copyright 2015 TRENDnet. All Rights Reserved.
Port: Enter the port used on your log server.
Email Syslog
Log Schedule: Select from the pull down menu the schedule to email logs
Severity level: Select the log types to send
Send to: Enter the email address to send logs
DHCP Client: Select to enable DHCP server
Day for sending logs: Select when to email logs
Time for sending logs: Enter the time when to email logs
Clear logs: Select to delete logs after emailing logs
Email Server
Send log from: Enter the assigned email recipient
Subject: Enter the subject of the log email
SMTP server: Enter the SMTP server of IP address
SMTP Authentication: Select to authenticate SMTP
Username: Enter SMTP username
Password: Enter the SMTP password
View your log
You may want send your router log to your e-mail address or to an external log server
(also known as Syslog server) so you can check it periodically while away from home.
You may also want to only see specific categories of logging.
1. Log into the management page (see “Access the management page” on page 9).
2. Click on Management, and click on System Log. Click Apply to save settings.
To Next Page
Loading...
Need help?
General
