EasyManuals Logo

TRENDnet TEW-755AP User Manual

TRENDnet TEW-755AP
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-755AP
22
WDS Link
Wireless 2.4GHz > WDS Link Settings
This section outlines the available features to configure wireless 2.4GHz when Access
Point mode is selected.
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Wireless 2.4GHz
3. Configure the below settings and click Apply to save settings.
Site Survey: Click this option to scan for available WDS networks
Remote AP MAC: Enter the MAC address of the remote access point you want to
establish WDS connection.
Security Mode: Select from the pull down menu the wireless security that is used
on the wireless network you would like to connect to.
Basic
Wireless 2.4GHz > Wireless Network
This section outlines the available features to configure wireless 2.4GHz when Access
Point mode is selected.
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Wireless 2.4GHz
3. Configure the below settings and click Apply to save settings.
Wireless Mode: If all of the wireless devices you want to connect with this Access
Point can connect in the same transmission mode, you can improve performance
slightly by choosing the appropriate mode. If you have some devices that use a
different transmission mode, choose the appropriate mode.
2.4GHz Wireless
o B/G/N mixed: Select this mode for the best compatibility. This mode allows older
802.11b and 802.11g wireless devices to connect to the router in addition to
newer 802.11n devices.
o B/G mixed: This mode only allows devices to connect to the router using older
and slow 802.11b or 802.11g technology and it thereby reduces the router’s
maximum speed to 54Mbps (typically not recommended).
o N only: This mode only allows newer 802.11n devices to connect to your router.
This mode does ensure the highest speed and security for your network, however
if you have older 802.11g wireless clients, they will no longer be able to connect
to this router.
o G only: This mode only allows devices to connect to the router using older and
slow 802.11g technology (typically not recommended).
o B only: This mode only allows devices to connect to the router using older and
slow 802.11b technology (typically not recommended).

Other manuals for TRENDnet TEW-755AP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEW-755AP and is the answer not in the manual?

TRENDnet TEW-755AP Specifications

General IconGeneral
BrandTRENDnet
ModelTEW-755AP
CategoryWireless Access Point
LanguageEnglish

Related product manuals