TRENDnet TEW-828DRU User Manual

© Copyright 2015 TRENDnet. All Rights Reserved.
6
TRENDnet User’s Guide
TEW-828DRU
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your modem.
2. Turn off your modem.
3. Disconnect the Network cable from your computer to your modem.
4. Connect your modem to the router Internet port (yellow).
5. Position the antennas as shown for optimal wireless coverage.
6. Connect your computer to one of the router LAN ports.
7. Connect the power adapter to the router and then to a power outlet. Switch the
power on/off switch to the On position (-).
9. Turn on your modem.
10. Verify that the status LED indicators on the front of the router are illuminated:
Power, Internet, Wireless N, Wireless AC1, Wireless AC2.

TRENDnet TEW-828DRU Specifications

General

Modulation	16-QAM, 64-QAM, 256-QAM, CCK, DBPSK, DPSK, DQPSK, OFDM
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	3200 Mbit/s
WLAN data transfer rate (first band)	1300 Mbit/s
WLAN data transfer rate (third band)	600 Mbit/s
DSL WAN	No
Ethernet WAN	Yes
Certification	FCC
Processor cores	2
Processor frequency	1000 MHz
VPN support	PPTP/L2TP
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Security algorithms	WEP, WPA-PSK, WPA2-PSK, WPA2-RADIUS
Authentication method	RADIUS
Product type	Tabletop router
Product color	Black
Media access protocol	CSMA/CA w / ACK
Antenna gain level (max)	5 dBi
Output current	3.5 A
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	170 mm
Width	240 mm
Height	45 mm