Hardware Installation
1. Connect your modem to the mesh router Internet port (blue and connect the
included power adapter.
Note: If you purchased a mesh network kit with multiple units, you can choose any of the
units to set up first as the master. The router may take up to one minute to boot up.
When the router LED changes form white to orange, this indicates that the router is
ready for setup. For the initial setup, do no power on any other units except the single
unit to be setup as master.
2. Using your mobile device, download and install the TRENDnet Mesh mobile app by
scanning the appropriate QR code below for y our mobile device.
3. After the app installation is complete, open the TRENDnet Mesh app.
4. Click on the blue text link Wizard at the bottom of the screen to start the router setup
wizard and follow the steps to complete the setup.
To Next Page
Loading...
Need help?
General
