8.4 Replacing the desiccant
In models 10, 20 and 30, the towers must be filled directly with desiccant. In all other models, desiccant bags must be
used. The graphic here explains which procedure applies to your model, the item code to be cited when ordering the
desiccant and the quantity required.
Figure 8. Changing the desiccant in the Dryspell Plus range of models-types of filling,
item codes and quantities of desiccant required
8.5 Service procedures
The procedures to be followed for servicing/replacement of sub-assemblies in Dryspell Plus dryers are described in this
section. Servicing/replacement must be carried out when there is failure of the respective parts and if found necessary
during the monthly, semi-annual and annual inspections.
17
To Next Page
Loading...
