5.
6.
7.
8.
9.
10.
11.
group.
- or -
Click on the Mask button so that settings of the scene do not influence the first group.
- or -
Click on the Off button to switch off the first group.
Repeat steps 3 to 4 for the remaining three groups.
Click on the Save button.
-> The dialog box Save as scene is displayed.
If necessary, change the scene in which the groups are to be saved and confirm with OK.
-> The scene is saved.
Click on the green arrow key to define further groups for this scene and repeat steps 3 to 6 on the following two
pages.
Click on the Folder button to define further scenes and use the arrow keys to select a new scene.
Repeat steps 2 to 7 if necessary.
6.3.3. Sequence
Start, duration and repetition of scenes are saved in a defined order in a sequence. You can assign scenes to a
sequence several times and in any order.
A sequence is ended if:
The following operating elements are available to define a sequence:
I NOTICE
A scene is not saved until when you click on the Save button and confirm the dialog box "Save as scene" with
OK.
A schedule list, schedule or another sequence is called up._
The sequence is ended manually._
The end of the sequence is reached._
I NOTICE
A scene will only achieve its final dimming level within a sequence if no other sequence is called up during the
fade time.
To Next Page
Loading...