6.5. Plug Application
The Application mode is designed to be easy to use. All operating steps have already been explained in the
previous sections.
6.5.1. Changing the Application
Changing the Application is described in the section " ". When the Application isSelecting the Application, p.
changed, the ›x-touch‹ software is automatically restarted.
6.5.2. Addressing
Addressing is done on a connector on the operating device. Addressing is therefore not possible and necessary.
6.5.3. Zone assignment
There is only 1 zone with 4 colour scales in the Plug Application. Each colour scale corresponds to a group.
Depending on the configuration, the groups can be switched and dimmed individually in the Home
menu (see " ").Creating a layout for the Home menu, p. 78
The following topics are explained at the points indicated.
...
Configuring a schedule list (see " ").Configuring a schedule list, p. 69_
Configuring a colour event (see " ").Configuring colour events, p. 73_
To Next Page
Loading...