Tridonic x/e-touchPANEL 02 - Page 75

Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en
Colour Application
c
75 / 118
4.
5.
6.
7.
8.
9.
To determine the RGB value using a colour table, click on a colour in the first RGB tab.
- or -
To enter the RGB value numerically, enter the RGB values in the second tab.
- or -
To enter the RGBW value numerically, enter the RGBW values in the third tab.
Activate the Zone check box (Z1 to Z4) to assign the colour event to one or several zones.
To define the exact duration and fade time, click on the Timing, Fading button. Use the arrow keys to select the
values and confirm with OK.
Confirm the entries with OK.
Repeat steps 2 to 6 to define further colour events.
Confirm the settings with OK.
-> The colour event in the colour sequence is saved.
...