Use DHCP Enables the assignment of the network configuration to clients by a server.
IP address Entering the IP address (for the Ethernet connection).
Subnet mask Entering the net mask (for the Ethernet connection).
Gateway Entering the gateway (for the Ethernet connection).
Status Displays the connection status.
...
I NOTICE
In addition to the tabs mentioned here, there are three more. But these are not available in all Applications:
"Name" and "Layout" are available only in Basic, Colour, Plug Application_
"Emergency" is only available in Emergency application._
These three tabs / basic settings are discussed in the corresponding Application chapters.
To Next Page
Loading...