triOS nanoFlu - Page 12

10 D01-060en202008 Manual nanoFlu
Use Calibration
Malfunction &
Maintenance
Commis-
sioning
General
Information
FAQTechnical Data Warranty
Customer
Service
Contact
Keyword
Index
AccessoriesIntroduction
Introduction // nanoFlu
Peripherals
In the environment settings (“Peripherals”), various options are available depending on the version of the sen-
sor.
Measurement
The "Measurement" page shows the results of the last measurement. In addition, the interval settings for the
automatic measurements and the number of individual measurements to be averaged for the nal measure-
ment can be changed here. On this page, it is also possible to scale the measured value with the help of entries
for “O󰀨set” and “Scaling”.
The new measurement can be triggered at any time. To do this, click on the “Measure Now!” button. A new
measurement will then be carried out with the saved settings.