Triumph Speed 400 - Lights System Maintenance

MAINTENANCE AND ADJUSTMENT
133
Spare fuses for fuse box 2 are located
on the inside of the fuse box and should
be replaced if used.
FUSE 1
SPARE SPARE
FUSE 2
cley
1
2
Fuse Box 2
Fuse Number and Circuit
Protected
Rating (Amps)
Fuse 1 - ABS pump 15
Fuse 2 - ABS solenoid 10
clfa
1
Main Fuse (Starter Solenoid)
Fuse Number and Circuit
Protected
Rating (Amps)
Fuse 1 - Main fuse (battery
supply to ignition key and other
electrical loads)
30
Lights
NOTICE
The use of non-approved bulbs may
result in damage to lenses and other
lighting unit components.
In addition, the use of bulbs of
incorrect wattage may cause the
chassis ECM to cut power to affected
lighting circuits.
Use genuine Triumph supplied bulbs as
specified in the Triumph Parts Catalog.
Always have replacement bulbs
installed by a competent person with
the specialist knowledge and technical
understanding of motorcycles, such as
an authorized Triumph dealer.
Headlight(s)
WARNING
Adjust road speed to suit the visibility
and weather conditions in which the
motorcycle is being operated.
Make sure that the headlight beam is
adjusted to illuminate the road surface
sufficiently far ahead without blinding
oncoming traffic.
An incorrectly adjusted headlight may
impair visibility for oncoming traffic,
leading to an accident which could
result in serious injury or death.