GENERAL INFORMATION
43
WARNING
With the key in the LOCK position, the
steering will become locked.
Never turn the key to the LOCK
position while the motorcycle is
moving as this will cause the steering
to lock.
Locked steering will lead to loss of
motorcycle control which could result
in serious injury or death.
P
U
S
H
O
F
F
O
N
I
G
N
I
T
I
O
N
4
3
2
1
1. ON position
2. Ignition switch/Steering lock
3. LOCK position
4. OFF position
Switch Operation
This is a three position, key operated
switch. The key can be removed from
the switch only when it is in the OFF or
LOCK position.
TO LOCK: Turn the steering fully to the
left, turn the key to the OFF position,
push and fully release the key, then
rotate it to the LOCK position.
Ignition Key
WARNING
Additional keys, key rings/chains or
items attached to the ignition key may
interfere with the steering.
Remove all additional keys, key rings/
chains and items from the ignition key
before riding the motorcycle.
Failure to follow the advice above
may lead to loss of motorcycle control
which could result in serious injury or
death.
NOTICE
Additional keys, key rings/chains or
items attached to the ignition key may
cause damage to the motorcycle's
painted or polished components.
Remove all additional keys, key rings/
chains and items from the ignition key
before riding the motorcycle.
NOTICE
Do not store the spare key with the
motorcycle as this will reduce all
aspects of security.
To Next Page
Loading...
