EasyManua.ls Logo

Triumph Speed 400 - Anti-Lock Braking System (ABS) Warning Light; Engine Immobilizer Indicator Light; High Coolant Temperature Warning Light

Triumph Speed 400
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTRUMENTS
28
NOTICE
If the engine oil pressure is too low,
the low oil pressure warning light will
illuminate.
If the low oil pressure indicator
remains on, stop the engine
immediately and investigate the
situation.
Running the engine with low oil
pressure will cause severe engine
damage.
High Coolant Temperature Warning
Light
With the engine running, if
the engine coolant
temperature becomes
dangerously high, the high
coolant temperature warning light will
illuminate.
NOTICE
Stop the engine immediately if the
high coolant temperature warning
light illuminates.
Do not restart the engine until the
fault has been rectified.
Severe engine damage will result from
running the engine when the high
coolant temperature warning light is
illuminated.
Engine Immobilizer Indicator Light
This motorcycle is equipped
with an engine immobilizer
which is activated when the
ignition switch is turned to
the OFF position.
When the ignition switch is turned to
the OFF position, the engine immobilizer
light will flash on and off for 24 hours to
show that the engine immobilizer is on.
When the ignition switch is turned to
the ON position the engine immobilizer
and the indicator light will be off.
If the indicator light remains on it
indicates that the engine immobilizer
has a malfunction that requires
investigation. The fault must be checked
and rectified by a competent person
with the specialist knowledge and
technical understanding of motorcycles,
such as an authorized Triumph dealer.
Anti-lock Braking System (ABS)
Warning Light
WARNING
If the Anti-lock Brake System (ABS)
is not functioning, the brake system
will continue to function as a non-
ABS equipped brake system. Do not
continue to ride for longer than is
necessary with the ABS warning light
illuminated.
The fault must be checked and
rectified by a competent person with
the specialist knowledge and technical
understanding of motorcycles, such as
an authorized Triumph dealer.
Braking too hard will cause the wheels
to lock, leading to loss of motorcycle
control which could result in serious
injury or death.

Table of Contents

Related product manuals