Triumph Speed 400 User Manual

CLEANING AND STORAGE
142
Black Chrome Care
Items such as headlight bowls and
mirrors on some models must be
correctly cleaned to preserve their
appearance. Please contact your dealer
if you are unsure which components
on your motorcycle are black chrome
parts. Maintain the appearance of
black chrome items by rubbing a small
amount of light oil into the surface.
Exhaust System Care
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance.
These instructions can be applied to
chrome, brushed stainless steel and
carbon fiber components; matt painted
exhaust systems should be cleaned as
above, noting the care instructions in
the Matt Paintwork section previously.
The exhaust system must be cool before
washing to prevent water spotting.
Washing
Wash as previously described.
Make sure that no soap or water enters
the exhausts.
Drying
Dry the exhaust system as far as
possible with a soft cloth or chamois
leather. Do not run the engine to dry
the system or spotting will occur.
Protecting
NOTICE
The use of products containing
silicone will cause discoloration of the
chrome and stainless steel parts and
must not be used.
The use of abrasive cleaning products
will damage the finish and must not be
used.
When the exhaust system is dry, apply
a suitable proprietary motorcycle pro-
tection spray onto the surface, following
the manufacturer’s instructions.
It is recommended that regular
protection be applied to the system as
this will both protect and enhance the
system's appearance.

Triumph Speed 400 Specifications

General

Displacement	398.15 cc
Max Torque	37.5 Nm @ 6, 500 rpm
Transmission	6-speed
Clutch	Wet, multi-plate
Rear Suspension	Monoshock with preload adjustment
Front Tyre	110/70 R17
Rear Tyre	150/60 R17
Seat Height	790 mm
Wheelbase	1, 377 mm
Dry Weight	170 kg
Fuel Tank Capacity	13 liters
Engine Type	Liquid-cooled, 4 valve, DOHC, single-cylinder
Max Power	40 PS @ 8, 000 rpm
Fuel System	Electronic fuel injection
Exhaust	Stainless steel
Final Drive	Chain
Frame	Hybrid spine/perimeter, tubular steel frame. Bolted subframe
Front Suspension	43mm USD forks
Front Brake	300mm disc
Rear Brake	230mm disc
Front Wheel	17-inch alloy
Rear Wheel	17 x 4.0 in
Instrumentation	Digital LCD display