Triumph Speed 400 - Trip Meter

INSTRUMENTS
35
Trip Meter
WARNING
Do not attempt to switch between
the odometer and trip meter display
modes or reset the trip meter while
the motorcycle is in motion.
Stop the motorcycle to switch between
the odometer and trip meter display
modes or reset the trip meter.
Failure to follow the advice above
may lead to loss of motorcycle control
which could result in serious injury or
death.
There are two trip meters. Either trip
meter shows the distance that the
motorcycle has traveled since the meter
on display was last reset to zero.
1
1. Trip meter display (TRIP 1 shown)
To switch between trip meters, push
and release the SCROLL/SELECT button,
located on the left handlebar switch,
until the required trip meter is shown.
cldn_1
1
1. SCROLL/SELECT button
Scrambler 400 X Only
The trip meters are not accessible when
in off-road mode. The trip meter data
continues to be collected when riding in
off-road mode. The updated trip meter
data is shown in the trip meters after
switching the off-road mode off.
Trip Meter Reset
To reset either of the trip meters:
▼ Select the trip meter to be zeroed.
▼ Push and hold the SCROLL/SELECT
button for one second. After more
than one second, the trip meter on
display will reset to zero.