Triumph Speed 400 - Seat - Installation

GENERAL INFORMATION
58
Scrambler 400 X
Passenger Seat
NOTICE
The passenger seat must be removed
before removing the rider’s seat.
▼ Insert the ignition key into the seat
lock.
▼ Turn the ignition key clockwise while
pressing down on the rear of the
seat. This will release the passenger
seat from its lock.
▼ Lift the seat up from the back
and slide rearwards for complete
removal from the motorcycle.
clgb
1
2
1. Seat lock
2. Passenger seat
Rider’s Seat
▼ Remove the passenger seat as
described above.
▼ Remove the fasteners at the rear of
the seat.
▼ Lift the seat up from the back
and slide rearwards for complete
removal from the motorcycle.
cldw
1
2
1. Fasteners
2. Rider's seat
Seat - Installation
WARNING
Make sure the motorcycle is stabilized
and adequately supported.
Do not support the motorcycle on
any ancillary component, the exhaust
system or any other non structural
parts of the motorcycle frame.
A correctly supported motorcycle will
help prevent it from falling.
An unstable motorcycle may fall
resulting in motorcycle damage,
serious injury or death.