Triumph Speed 400 - Page 88

MAINTENANCE AND ADJUSTMENT
88
Operation description
Odometer Reading in Miles (km) or Time Period, whichever comes first
First
Service
Annual
Service
Mileage Based Service
Daily
600 Mile
(1,000 km)
or 6 Month
Service
Yea r
10,000 and
30,000 Mile
(16,000 and
48,000 km)
Service
20,000 Mile
(32,000 km)
Service
40,000 Mile
(64,000 km)
Service
Steering and Suspension
Steering - check for free operation • • • • • •
Front and rear suspension - check for damage/
leaks/smooth operation
• • • • • •
Swinging arm spindle - lubricate • • •
Headstock bearings - check/adjust - except first
service
• •
Fork oil - replace •
Brakes
Brake system - check operation • • • • • •
Brake pads - check wear levels* • • • • • •
Brake fluid levels - check • • • • • •
Brake fluid - replace - every 2 years, regardless of
mileage*
Every two years, regardless of mileage
Final Drive
Drive chain slack - check/adjust • • • • • •
Drive chain - wear check* • • • • •
Drive chain - lubricate • • • • •
Drive chain rubbing strip - check for wear, cracks
or damage*
• • • • •
Electrical
Lights, instruments and electrical systems - check/
adjust
• • • • • •
General
Bank angle indicators - check for wear* • • • • • •
Center and/or side stand - check for wear/smooth
operation
• • • • • •
Instruments and engine ECM - check for latest
calibration download using the Triumph diagnostic
tool
• • • • •
Autoscan - carry out a full Autoscan using the
Triumph diagnostic tool (print a customer copy)
• • • • •
Fasteners - inspect visually for security • • • •
Carry out all outstanding Service Bulletin and
warranty work
• • • • •
Carry out road test • • • • •
Complete the service record book and reset the
service indicator (if equipped)
• • • • •
Seat latch cable - check for smooth operation,
lubricate as necessary
• • • •