Trojan TR 1000 - Step 6: Insert Power Cable; Step 7: Insert Safety Key; Final Assembly Check

13
TR 1000 - T
ASSEMBLY STEPS
STEP 6:
Insert the Power Cable (31) into the inlet as
illustrated.
STEP 6
STEP 7:
Put the Safety Key (88) in the slots on the console
and begin the exercise.
STEP 7
PLEASE CHECK COMPLETE ASSEMBLY AS PER THE ABOVE AND SECURE
ALL THE BOLTS. DO THE FOLLOWING OPERATION AFTER CHECKING
EVERYTHING IS OK. BEFORE YOU USE THE TREADMILL, PLEASE READ THE
INSTRUCTION CAREFULLY.
ATTENTION: