11
SCREW OFF THE LOCK NUT AND
MAKE SURE THAT THE RECESS IS AT
AROUND 90 DEGREES TO LONG
ITUDINAL DIRECTION OF THE NECK.
YOU CAN TURN MANUALLY ON THE
KEY OR BY STRING UP MODE PAGE 11
PULL TIGHT ON THE STRING TO GET
PRETENSION AND BEND IT ONE HALF
TURN AROUND THE BOTTOM SIDE OF
THE STRING SHAFT.
MERGE THE STRING UP TROUGH THE
STRING RECESS TOWARDS THE THREAD.
NOTE
TO ENSURE BOTH HIGH „e“ & „B“
SRINGS ARE SECURELY LOCKED,
WE RECOMMEND MAKING TWO WIN
DINGS AFTER RAISING THE STRING
UP TO THE THREAD OF THE POST.
BEND THE STRING AROUND THE
SHAFT AS SHOWN IN THE PICTURE
AN SCREW ON THE LOCK NUT.
1 2 43
HOW TO USE THE STRING SHAFT
GETTING STARTED
90°
2X
WINDINGS
To Next Page
Loading...
