Safety
2.9 In case of emergency
In case of malfunction
•
In case of unusual operating states, open the acrylic top lid to stop working process or respectively press
the Emergency stop button, if available and switch off the laser device.
•
When appropriate disconnect the machine from the mains.
•
Inform laser safety officer and supervisor.
•
Follow the Operating manual.
•
Have repair work performed by Trotec Laser GmbH service technicians only.
•
In case of fire: Use only CO
2
fire extinguisher to quench the fire, insofar as this is possible without
endangering yourself.
Notice
After a deletion, Trotec Technical Support must be involved before the system is put back into
operation.
In case of accident, First Aid
•
If due to laser irradiation eye injury has occurred (upon exceedance of the maximum allowable irradiation
rate), the accident victim must immediately be presented to an ophthalmologist.
•
Assumption of eye injury is justified whenever laser irradiation has occurred and the maximum allowable
irradiation rate may have been exceeded.
•
First aider must pay attention to self-protection.
•
Power off the device.
•
Remove injured person from the danger zone and provide First Aid.
•
Call emergency doctor!
30
To Next Page
Loading...
Need help?
General
