Machine overview
Vacuum table
The vacuum table fixates various materials to the working
table using vacuum. This ensures correct focusing over
the entire surface, leading to better engraving results. In
addition, it reduces the handling effort associated with
mechanical mounting.
The vacuum table is the ideal table for thin and lightweight
materials, such as paper, foils and films, that generally do
not rest flatly on the surface.
Aluminum slat cutting table
The cutting table with aluminum slats is ideal for cutting
thicker materials (8 mm thickness and above) and for parts
wider than 100 mm.
The slats can be arranged individually, consequently the
table can be adjusted to each individual application.
Acrylic slat cutting table
The cutting table with acrylic slats prevents reflection during
cutting. This table is used in particular for cutting thicker
materials (8 mm thickness and above) and for parts wider
than 100 mm.
The slats can be arranged individually, consequently the
table can be adjusted to each individual application.
42
To Next Page
Loading...
