Maintenance
Step 2: Cleaning with cleaning liquid and cleaning tissues
1. Remove the lens and rinse it with cleaning liquid to wash away coarse soiling.
2. Put some cleaning liquid onto the lens and leave the liquid for 1 minute to take effect.
3. Soak a cleaning tissue with cleaning liquid and carefully wipe off the surface.
4. Now carefully insert the lens with the lens holder into the laser head and fixate the clamping ring.
Notice
Trotec Laser GmbH recommends to use the following cleaning products, which are available as
accessory parts:
Lens cleaning cloth (part number 69249) and lens cleaning liquid (part number 69248).
83
To Next Page
Loading...
Need help?
General
