CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Auxiliary Power Supply Installation Step E (secure power supply):
Secure the Power Supply to the square frame
tube using 2 wire-ties (positions shown)
*Wire-ties should also secure the extra Power
Supply cables
b) Verify that there is no interference between
the wire-ties or cables and the moving brake
flywheel
Auxiliary Power Supply Installation Step F (secure access plastic):
a) Insert the Access Plastic
b) Re-install the Access Plastic screws (quantity
3) with a Phillips head screwdriver (not
provided)
Truefitness.com / 800.426.6570 / 636.272.7100 24
To Next Page
Loading...
