CHAPTER 2: ASSEMBLY GUIDE
Truetness.com / 800.426.6570 / 636.272.7100
14
TREADMILL ASSEMBLY STEPS CONTINUED:
STEP 9 Rear Foot Leveling:
a) Ensure treadmill incline rack wheels
and rear feet are resting on the oor and
not on cardboard, packaging, etc.
b) Using the pliers to loosen the wing-nut
(A) counter-clockwise.
c) Using a level or estimating by sight, turn
section (B) of foot counter-clockwise to a
proper height.
d) Tighten wing-nut (A) to secure (B)
section.
NOTE: Same adjustment applies to both
sides.
STEP 10 Safety Key:
a) Remove packaged Safety key from hard-
ware kit.
b) Cut o the shorter piece of string as
shown.
c) Attach Safety Key magnet to front of
console as shown below.
d) Attach clip to clothing at the beginning
of any workout.
NOTE: Read the entire Owner’s Manual
before attempting any workout.
NOTE: Remove Safety Key from treadmill
aer each use.
To Next Page
Loading...
