3.2.4 Charging the Battery by 4-slot Docking Cradle (Optional)
1. Plug the power adapter of the charger into a properly
grounded outlet and plug the charger connector to a
battery charger DC socket.
2. Install the printer onto the charger at the correct angle
and direction as shown on left.
Note: To avoid damage, DO NOT install the printer
at the angle shown below.
3. Turn on the power button of charger. It will start
charging. (The LED on charger will turn on.)
4. When charging, the battery status LED indicator on
the printer turns solid amber. When fully charged, the
printer LED indicator turns off. It will stop charging
automatically after the battery is fully charged.
To Next Page
Loading...
