TSC Alpha-40L RFID User Manual

72
7.5 RFID POSITION
Description
This command is used to set the how far the RFID tag encoding position of the currently installed tag should be offset from Top
of Form. Normally, this value is set automatically by the RFID calibration process and should not be changed.
Syntax
RFID POSITION #
Parameter
Description
#
Position of the antenna (0 ~ 1218 dot)
Sample Code
Example
RFID POSITION 60

TSC Alpha-40L RFID Specifications

General

Brand	TSC
Model	Alpha-40L RFID
Category	Barcode Reader
Language	English