TSC Alpha-40L RFID

61
5.6 Setting RFID
Press [RFID] button from Printer Function to enter the RFID menu on TSC Console. Here provides users to set the RFID common settings,
RFID calibration and checking statistics.
Tab
Item
Description
OFF/ ON
Select ON/OFF to enable/disable the RFID encoder
module.
OFF/ STOP/ OVERSTRIKE
This menu item selects the error handling mode for RFID
failures.
1~10
This menu item selects the number of label retries that the
RFID encoder will attempt before declaring a fault.
OFF/ ON
This menu item determines if errors are declared when the
Label Retry count is exceeded.