TSC Alpha-40L RFID User Manual

68
7. RFID Setting Commands
Incorporate RFID commands into new or existing printer programs.
Supported device: Alpha-40L(R) series
IMPORTANT:
With all examples make sure the label length matches the physical length of the installed media.
7.1 RFID ON/OFF
Description
This command is used to enable/disable the RFID encoder module.
Syntax
RFID ON/OFF
Parameter
Description
ON
Enable the RFID encoder module
OFF
Disable the RFID encoder module
Sample Code
Example
RFID ON

TSC Alpha-40L RFID Specifications

General

Brand	TSC
Model	Alpha-40L RFID
Category	Barcode Reader
Language	English